IoT Assignment #7 - Programming on Samsung ARTIK Board & 
                    ARTIK Cloud

This assignment is to be done individually and is worth 
a total of 5% of the final mark.

In this assignment, you will be required to do the following.

1. Use ARTIK Board, ARTIK IDE & ARTIK Cloud
2. Use the Humidity/Temperature Sensor used in the previous
   assignment to monitor the humidity and temperature.
3. Report these sensed data to ARTIK Cloud every minute.
4. You should be able to show the monitored data using
   the ARTIK Cloud Dashboard.
5. When the temperature goes above 30 degrees Celcius,
   the ARTIK Cloud should send an action to the ARTIK Board
   to turn the Red color on the built-in LED.
   When the temperature goes below 25 degrees, the Red color
   should be turned off.
   When the temperature reaches 20 degrees or less, the 
   Blue colar on the built-in LED should be turned on.
   When the temperature goes above 20 degrees, the Blue
   color should be turned off.
   
Demonstrate that your work by capturing the program
excution results.

Submit a zipped package of your source code and
demonstration(screenshots or video) via LMS.

Have fun!